Shoulder Joint and Humerus Locking Plate System
clavicle locking plate II
Code: 251602
Width: 11mm
Thickness: 3.5mm
Material: TA3
Screw size:
HC3.5, HA3.5, HB4.0
Application: Acromioclavicular joint dislocation, lateral fracture of clavicle with acromioclavicular joint dislocation
● Excellent anatomic pre-shaped design, 12°angle fit the bone surface well.
● Provide 4pcs length and 3pcs hook height.
● Round blunt hook design can reduce the acromion impact.
clavicle S shape locking plate I
Code: 251601XXX
Width: 11.5mm
Thickness: 3.5mm
Material: TA3
Screw size:
HC3.5, HA3.5, HB4.0
The anterior S design is more suitable for clavicle biomechanics.
● Excellent anatomic pre-shaped design.
● Round blunt edge design can reduce the irritation to the soft tissue.
● Reconstruction design can be easy bending in the operation.
distal clavicle locking plate
Code: 251600
Width: 10mm
Thickness: 3.3mm
Material: TA3
Screw size: Head: HC2.4/2.7
Body: HC3.5, HA3.5, HB4.0
● Excellent anatomic pre-shaped design.
● Round blunt edge design can reduce the irritation to the soft tissue.
● Reduction design can be easy bending in the operation.
● Distal screw with decreased diameter can increase the stability and pull-out strength.
humeral great tuberosity locking plate
Code: 251717
Width: 12mm
Thickness: 1.5mm
Material: TA3
Screw size:
Head: HC2.4/2.7, HA2.5/2.7
Body: HC 3.5, HA3.5, HB4.0
● Cross locking fixation of screw can provide excellent fixation.
● Proximal super low-profile design can avoid acromion impact.
● The edge with sutured hole can suture the tendon and ligament.
proximal humeral locking plate I
Code: 251716
Width: 12.5mm
Thickness: 4mm
Material: TA3
Screw Size:
HC3.5, HA3.5, HB4.0
-Excellent anatomic pre-shaped design.
The proximal end with 8pcs locking holes and 1pc normal hole
● Provide stable support for humerus tuberosity.
● The normal hole can provide reduction and compression function.
Proximal profile design can further reduce the risk of acromion impingement.
The proximal end distributed 6pcs 2.9mm sutured holes is convenient for suture the tendon and ligament.
proximal humeral locking plate IV
Code: 251715
Width: 12mm
Thickness: 4.2mm
Material: TA3
Screw size:
HC3.5, HA3.5, HB4.0
Excellent anatomic pre-shaped design, no need bending. Proximal 8pcs locking holes and 1pc combined hole
● Precision design for the pin hole position and screw angle, covered the whole humeral head with excellent support.
● The standard hole can support the intraoperative reduction and compression function.
● It has excellent holding strength for the osteoporosis and comminuted fracture.
The proximal end distributed with 10pcs 2.0mm sutured hole is convenient for tendon and ligament suture and muscle balance.
